| Form | Stereo preamplifier | ||||
| Circuit system | Equalizer-amplifier part: 2 steps of differentials current mirror amplification Class-A SEPP
Control amplifier part: 2 steps of differentials current mirror amplification Class-A SEPP |
||||
| Input terminal | Phono: 2.5mV/100 ohm, 10kohm, 25kohm, 50kohm, 75kohm, 100kohm
Cartridge load capacity: 100pF, 150pF, 200pF, 300pF, 400pF, 500pF AUX1, 2, Tape Play:150mV /, 50kohm |
||||
| Phono maximum permissible input | 300mV (1kHz, THD 0.01%) | ||||
| Output-terminal | Tape Rec: 150mV / 1kohm
Output(RL:50kohm): 1V/450 ohm (rate), 20V/150 ohm (MAX) |
||||
| THD (20Hz – 20kHz) | Phono: 0.006% (at the time of 1V output Volume-20 dB, gain-control 0dB)
AUX: 0.005% (at the time of 1V output gain-control 0dB) |
||||
| Frequency characteristic |
|
||||
| SN ratio (IHF, A network)
Short circuit |
Phono: 80dB (output 1 V:00)
AUX: 100dB (output 1 V:00) |
||||
| Phono Subsonic Filter | 15Hz, 6dB / oct | ||||
| The semiconductor used | Transistor: 36 pieces
Diode, other:47 piece |
||||
| Supply voltage | 100V, 50Hz/60Hz | ||||
| Power consumption
(Electrical Appliance and Material Control Law) |
10W | ||||
| AC outlet | Power-switch interlock: Three lines
Power-switch un-interlocking.: Two lines |
||||
| Dimensions | Width 420x height 81x depth of 357mm | ||||
| Weight | 6.3kg |
usato
Recensisci per primo “Pioneer C21”
Prodotti correlati
usato
amplificazione
€2,300.00
usato
cavi
€250.00
usato in conto vendita
cavi
€1,150.00
usato
diffusori acustici
€800.00
usato
amplificazione
€600.00
usato
diffusori acustici
€300.00
usato in conto vendita
preamplificatori
€3,500.00
usato
amplificazione
€300.00
usato
amplificazione
€1,000.00
usato
preamplificatori
€400.00
usato in conto vendita
cavi
€150.00
usato
preamplificatori
€2,000.00
Recensioni
Ancora non ci sono recensioni.